Logo
FULL SITE MENU
G

GENEREED

Contributing Member
Joined
Last seen
Messages
52
Reaction score
0

Latest activity Postings About

    • G
      GENEREED replied to the thread Shift rod.
      On the throttle shift linkage leading to the shift rod. Called a shift arm link I believe. I have to try again at 22.06 as the bolt pin...
    • G
      GENEREED replied to the thread Shift rod.
      So, a couple of things. No reverse on water. So have to try again using other measurement. That set screw must have made linkage to...
    • G
      GENEREED replied to the thread Shift rod.
      After several tries I got it. I found that the linkage at top of rod was hanging up on set screw in the rod top. I went back to my...
    • G
      GENEREED replied to the thread Shift rod.
      • IMG_0105.jpeg
    • G
      GENEREED replied to the thread Shift rod.
      • IMG_0103.jpeg
    • G
      GENEREED replied to the thread Shift rod.
      Got it. Look carefully, no choke plate on upper carb in manual.
    • G
      GENEREED replied to the thread Shift rod.
      • IMG_0094.jpeg
    • G
      GENEREED replied to the thread Shift rod.
      Maybe only 79, maybe they added that choke plate in 80???
    • G
      GENEREED replied to the thread Shift rod.
      I have same picture of intake parts in the manual minus the butterfly in upper carb. Unable to send you the picture in my manual. Have...
    • G
      GENEREED replied to the thread Shift rod.
      I have a manual printed in 1978 titled 79 v6 only 150-235 hp by evinrude. The rod and butterfly from a 79 v4 100hp fit in perfectly...
    • G
      GENEREED replied to the thread Shift rod.
      I can’t send a picture, I’t just won’t send. Says that picture to big.
    • G
      GENEREED replied to the thread Shift rod.
      No it has the original electric/manual choke on it. My 90hp had primers of which were handy. Like I said, my 79 manual shows no choke...
    • G
      GENEREED replied to the thread Shift rod.
      Yes, bare rod, no threaded holes. I was surprised but I had parts I needed from a Johnson 100 hp of same year. One thread I read said...
    • G
      GENEREED replied to the thread Shift rod.
      I won’t know until tomorrow or thursday but I believe I will have it. I will take two carbs off so I can reach it better. I solved...
    • G
      GENEREED replied to the thread Shift rod.
    Show older items
  • Loading…
  • Loading…
Back
Top